ELETOR controllers with new software from March 2020

SC-S controller

The software improvements concern the ventilation and air inlet control functions.

The ventilation function is fully configurable – from being switched off, through timed operation, to continuous operation at ventilation level, without switching off the fan. The air inlets are controlled using a new algorithm that limits actuator movements during ventilation, extending the service life of the mechanical system. In addition, this increases the proportion of natural ventilation around the set temperature threshold, resulting in lower electricity consumption by the ventilation system.

SC-12 controller

The SC-12 controller has gained two new functions for ventilation settings.

The software for SC-12 series controllers has been extended to allow ventilation speed calibration at a ventilation level of 99%, i.e. at the regulator's highest value without the „by-pass” contact engaged. The increasingly wide range of available fans, especially those with large diameters, has demonstrated the need for this calibration. In addition, the option to adjust the hysteresis between the first and second ventilation groups has been introduced to limit switching and extend the service life of the ventilation system.

All controllers manufactured after 20.03.2020 will already have the new software.