KnowledgeTS5: sensor installation tutorial video
We are pleased to present our latest tutorial video, which will guide you through the process of installing the Eletor TS5 temperature sensor in detail. The Eletor TS5 sensor is a key component of the ventilation control system, designed to work with controllers…
KnowledgeEmergency opening of inlet dampers during a power cut
This article covers the opening of inlet dampers in the event of a power cut. The starting point for discussing such a system is to determine what should happen to the air inlets when normal control is no longer available. Before choosing a solution, it is worth gathering information about the actuators used…
KnowledgeEC and AC fans: how to compare energy costs?
The calculator helps estimate electricity savings over a year. It compares two ebm-papst fans with a diameter of 63 cm, one with an EC motor (model: S3G630-DQ37-35) and the other with an AC motor (model: S6E630-DN01-35), controlled by the ELETOR SC-S controller. For a correct…
KnowledgeIs it worth investing in ebm-papst EC fans?
Although fans with electronically commutated motors are almost three times more expensive than comparable asynchronous motors, it may be worth considering a more expensive fan if ventilation is a постоянный and significant cost in livestock farming…
KnowledgeTest report on rope pulleys LT/282/2017
At the end of 2017, we sent two types of rope pulleys to a testing laboratory. The tests examined the strength of the pulleys by determining the maximum force required to destroy the product. The tests were carried out by the Product Assessment, Attestation and…
KnowledgeOLED technology at ELETOR
In an archived project, ELETOR prepared SC-series controllers to work with Winstar OLED displays. The work included panel software and testing modules in SC-S and SC-12 devices. An OLED display emits light from its own elements and does not require…
KnowledgeThe laser didn’t quite work out
At ELETOR, we are constantly looking for and testing solutions to improve our production. Outsourcing some production stages, together with growing demand for our devices, is forcing us to bring certain product-processing operations directly into our factory…
KnowledgeElectronics manufacturer and R&D: collaboration in practice
Designing an electronic device brings together user needs, production capabilities and the verification of design assumptions. In this archived post, ELETOR shares its experience of a company working with research and development institutions. The company needs a solution that can…
KnowledgeMotive x Action = Motivation
An email from one of our readers prompted us to write this post. Below, we present its contents (the original spelling has been retained). We have often shared our knowledge and observations in our work. Sometimes, a working day consisted of a dozen or so phone calls…
KnowledgeOwl and fan: ebm-papst’s position
In response to recent information about the alleged influence of the shape of a fan blade’s trailing edge on the noise level it emits, we explain: as clearly shown in the presentation above, the trailing edge has no effect whatsoever on the fan blade’s noise emission level…
KnowledgeHyBlade ebm-papst: reducing fan noise
A fan is one of the basic components of all ventilation and air-conditioning equipment. It is also usually the component that affects the noise level of the entire unit. Today, requirements for room comfort and, often, …