IC-AC: preparing for a new batch of controllers

Today, we assembled and successfully tested a prototype PCB with a new microcontroller for our ELETOR IC-AC controller. The board passed all electrical tests with excellent results, marking the project's move into the implementation phase.

The controller converts a 0-10V signal into the opening level of the air inlets and also enables manual control.

The first batch of this device, featuring an improved microcontroller, will be available in Poland and Ukraine. We expect this change to further improve the efficiency and reliability of the climate control system in livestock buildings.

What makes ELETOR IC-AC stand out?

✅ Advanced control: actuators and winches for air inlets powered by AC motors with right/left operation, and a potentiometer to read the current position.

✅ Operating modes: MANUAL and AUTO, providing full control over the ventilation system.

✅ Flexible control: input signal 0-10V, 2-10V, 10-0V, 10-2V, with the option to reverse the actuator's operation.

✅ Safety: monitoring of the control voltage 2-10V (or 10-2V) – if the signal is lost, the inlets will open to the preset emergency position.

✅ Robust IP56 enclosure – sealed and resistant to harsh conditions.

✅ Multilingual menu – available in Polish, English and Ukrainian.

✅ Precise calibration: of the air inlets' end positions, with manual mode and plus/minus keys.

✅ Overvoltage protection and an RC interference-suppression circuit – for longer relay life.

Applications:

👉 pig farms, poultry houses and cattle barns with a large number of air inlets;

👉 livestock buildings with extensive wiring and complex gravity ventilation.

📞 Find out more and buy on our website: https://eletor.pl/pl/ic-ac.html