Belimo 01APS-105 - differential pressure switch
Belimo 01APS-105 differential pressure switch for monitoring positive pressure, negative pressure and differential air pressure, as well as other non-flammable, non-aggressive gases. Measuring range: 1000...5000 Pa. The device has an adjustable setpoint and automatic reset.
Switching output; max. contact load 1,0 A / AC 250 V. Protection rating IP54 / NEMA 13.
Belimo 01APS-105 differential pressure switch
The device is used to monitor positive pressure, negative pressure and differential air pressure, as well as other non-flammable, non-aggressive gases in HVAC systems and energy management applications. It has an adjustable setpoint and automatic reset.
Key features
- Measuring range: 1000...5000 Pa.
- Repeatability: ±1%, min. ±5 Pa; switching differential: 250 Pa.
- Burst pressure: 10 kPa.
- Output signal: switch; max. contact load: 1,0 A / AC 250 V.
- Electrical connection: terminals for wires 0.5...1.5 mm².
- Protection rating: IP54 / NEMA 13.
- Included: 2 m PVC tube, 2 plastic duct connectors and screws.
Vertical installation with the pressure ports facing downwards is recommended. The pressure switch must not be installed upside down.
-
Brand
-
Reference01APS-105
-
EAN137630498100024
-
Electrical connectionTerminals
-
Measured valuesDifferential pressure
-
Output signalSwitch
-
Pressure measuring range1000...5000 Pa | 4.00...20.00 inch WC
-
Pressure switch output noteMax. contact load max. 1.0 A / AC 250 V
Over 20 years of experience
Reliable service and customer trust
Help with selecting and operating equipment