ELETORELETOR

ELETOR SOLUTIONS

Products.

New products, applications and development of ELETOR devices.

BELIMO PICCV valves with actuators held in handsProducts

PIQCV BELIMO: pressure-independent zone valve

the highest level of room comfort thanks to the optimal amount of water supplied to terminal units, high energy efficiency due to the low pressure differential required during operation, minimal design effort thanks to the ability to select valves quickly and reliably…

Compact BELIMO CM and MD actuators in front of a buildingProducts

CM..D BELIMO: compact actuators with damper

Residents of flats and apartments are paying increasing attention to stylish interiors. This trend presents a major challenge for architects and installation designers. No one wants installation components to detract from the aesthetics of an interior. That is why installations are often placed in…

BELIMO SF actuator shown with an ice-covered installationProducts

BELIMO SF actuators with spring return

The new SF actuators feature a high torque of 20 Nm, both when moving and holding position. This ensures complete reliability – during both standard operation and activation of the safety function. Two ultrasonically welded covers…

BELIMO CQ actuators in an illustration showing laboratory workProducts

BELIMO Q: actuators with short running times

New Belimo actuators with short running times open and close air dampers and valves quickly and almost silently, in heating and cooling circuits as well as ventilation and extraction systems. This means fresh air reaches the rooms immediately…

Orange BELIMO RobustLine actuator against an industrial installationProducts

BELIMO RobustLine: actuators for demanding conditions

In animal husbandry, as well as in buildings with swimming pools, agriculture, food processing and rooftop installations, Belimo RobustLine actuators remain corrosion-resistant and fully sealed, even in the harshest environmental conditions. Terminals made of…

BELIMO CM actuator on a ventilation damperProducts

BELIMO CM: damper actuator for confined spaces

Dimensions L/W/H: 158 mm/56 mm/16 mm (24 mm with position indicator) Running time 90°: programmable up to 35 s Rotation angle adjustable within 0...315° Unlimited rotation angle: adjustable (without stops) Enclosure protection rating: IP54 and IP66 Gear disengagement…

BELIMO CM actuator and worker installing the unitProducts

BELIMO CM: compact actuator design

Due to the close spacing of equipment, direct mounting of actuators on the control elements in air supply and exhaust outlets often causes problems. For this reason, Belimo has developed a completely new type of actuator that sets new standards in every…

Compact BELIMO QCV valve with actuator held in a handProducts

QCV BELIMO: compact zone valve

tight shut-off of the control valve, preventing energy losses caused by unwanted circulation in the system, manual setting of the kv coefficient in 2-way control ball valves, automatic adjustment to the set kv value, minimum…

SC-12 CONTROLLER ADAPTED FOR USE IN SERVER ROOMSProducts

SC-12 in a server room: using the ELETOR controller

Over the years, the range of applications for our controllers has continued to grow. ELETOR controllers can be found not only in pigsties, but also in poultry houses, barns, greenhouses and mushroom farms. We also create a good climate in porcelain factories and industrial halls. This time…

A key area of ELETOR's business is the serial production of ventilation controllers…Products

Serial production of ventilation controllers ELETOR

A key area of ELETOR's business is the serial production of ventilation controllers. In addition to manufacturing, we also provide technical consultancy and design bespoke electronic solutions for livestock farmers…

ELETOR IN THE GS1 SYSTEMProducts

ELETOR in the GS1 system

With effect from 24 August 2017, ELETOR was granted the right to use a coding-unit number in the GS1 system. In short, we are setting sail for wider waters, out into the ocean of global trade, and our products will never again get lost in supply chains.

CAPACITIVE KEYBOARD IN ELETOR PRODUCTS — first frame of the videoProducts

Capacitive keyboard in ELETOR devices

When designing new products, we give our customers’ suggestions top priority. The electronics market for livestock farmers operates by entirely different rules from, for example, the consumer electronics market. Therefore, devices must be closely tailored to…

Today we resumed shipping SC-S and SC-12 controllers. Shipments are prepared in order…Products

Resumption of SC-S and SC-12 shipments at ELETOR

Today we resumed shipping SC-S and SC-12 controllers. Shipments are prepared in order of the orders received. Tomorrow, 15 August, ELETOR will be closed; we will be back at work on 16 August. Thank you for your understanding and patience.

IoT ELETOR — first frame of the videoProducts

IoT ELETOR

On Friday morning, we managed to connect to our SC-S controller via WiFi! We’re one step closer to connecting our devices in a network. Our in-house WiFi module is intended to be compatible with all controllers our company has produced to date. This means that even if…

INCREASED PRODUCTION VOLUME BRINGS NEW CHALLENGES FOR ELETOR'AProducts

Higher demand for controllers: ELETOR’s production challenges

This year, we have recorded an almost 100% increase in demand for our controllers from the flagship Speed Control Servomotor series. We are proud and delighted, but it also came as an unexpected surprise. We are doing our best to optimise production and avoid delivery disruptions, but…

TS5-A SENSOR HOUSING IS EVEN MORE WATERTIGHTProducts

TS5-A: changes to the sensor housing seal

At the request of ELETOR, the manufacturer of housings for our TS5 series sensors produced a batch with a moulded-in gasket. According to the manufacturer's declaration, the housing has an IP67 rating, which according to the standards means complete protection of active or moving internal parts against…

It is a wonderful blessing to have fascinating work. Our work gives us a great deal of satisfactionProducts

Electronics without routine: work and projects at ELETOR

You might think that after producing controllers for more than a decade, we could fall into a routine – but not us. Every day is different from the last, and our customers bring us interesting challenges every day – such as the one in the photo below. Your trust gives us wings…

Yesterday, two speakers for the new series of alarm control panels arrived. They will ultimately work with…Products

ELETOR alarm control panel: speaker tests

Yesterday, two speakers for the new series of alarm control panels arrived. They will ultimately work with our devices, but because they are speakers rather than typical alarm sounders, they will need an intermediate device in the form of a sound generator. Thanks to the generator…

Cable pulley on a large angle bracketProducts

Cable pulley on a large angle bracket

What dimensions and mounting method are required for the project? Are the material and construction suitable for the conditions at the installation site? What limitations on use are specified in the component documentation?

NEW | BACKUP POWER SUPPLYProducts

Backup power supply: opening air inlets and outlets

Backup power supply with automatic and manual opening of air inlets and outlets. Used to ensure the safety of livestock in the event of a power cut or controller failure. If a fault is detected, the device will sound an alarm and open the winches to the set level…

TS3 PROBE SENSORS AVAILABLE AGAINProducts

TS3 probe sensors available again

Today we have replenished our stock of TS3-A-2M temperature sensors. Until now, these sensors were sold as a set with controllers from the Speed Control series. From April 2017, TS3 sensors were replaced by sensors in TS5 housings. Both sensors are…