Belimo CM24G-SR-L - actuator for dampers with analogue control

Belimo CM24G-SR-L - actuator for dampers with analogue control

Belimo
zł592.00
VAT included
zł481.30 tax excluded

Belimo CM24G-SR-L damper actuator with a torque of 2 Nm, AC/DC 24 V supply and 2...10 V control. The running time is 75 s / 90°, and the position feedback signal range is 2...10 V.

IP66 protection rating, universal clamp 6...12.7 mm and manual override using a magnet.

Delivery in approx. 14 days
Share

Belimo CM24G-SR-L damper actuator

An actuator with analogue control for positioning dampers in technical building systems. According to the documentation, it is intended for air dampers with an area of up to approx. 0.4 m².

Key features

  • Torque: 2 Nm; rated voltage: AC/DC 24 V, 50/60 Hz.
  • Control: 2...10 V; position feedback signal: 2...10 V.
  • Motor running time: 75 s / 90°; rotation angle: 95°, fixed setting, with mechanical angle limit stops.
  • Motor direction of rotation: counter-clockwise (ccw); manual override using a magnet.
  • Mechanical connection: universal clamp 6...12.7 mm; mechanical position indicator.
  • Power and control connection: Cable 1 m, 4x 0.75 mm².
  • Power consumption during operation: 1 W; in the rest position: 0.5 W; sizing power: 1.5 VA.
  • IEC/EN protection rating: IP66; IEC/EN protection class: III, Safety Extra-Low Voltage (SELV).
  • Ambient temperature: -30...50°C [-22...122°F].

Installation requirement for IP66: The rear of the actuator must fit tightly against the damper housing. When installed rotated by 180°, the documentation guarantees IP54 only.

  • Brand
    Belimo
  • Reference
    CM24G-SR-L
  • EAN13
    7630498110061

  • AC/DC voltage
    AC/DC 24 V
  • Power consumption (running)
    1 W
  • Power consumption (holding)
    0.5 W
  • Rated power
    1.5 VA
  • Power supply control connection
    Cable 1 m, 4x 0.75 mm²
  • Control type
    DC 2...10 V
  • Protection rating
    IP66
  • NEMA protection rating
    NEMA 2
  • Enclosure type
    UL Enclosure Type 2
  • Manual override
    Using a magnet
  • Running time (motor)
    75 s / 90°
  • Ambient temperature
    -30...50°C [-22...122°F]
  • Torque
    2 Nm
  • Direction of movement - motor
    counterclockwise rotation (ccw)
  • Rotational angle
    95°
  • Mechanical connection
    Universal clamp 6...12.7 mm

Techniczna karta katalogowa

Download (927.51KB)

Instrukcja montażu

Download (394.3KB)

EU Declaration of Conformity – CM24G-SR-L

Download (32.74KB)

Environmental Declaration – CM..

Download (72.46KB)
In business since 2005
Over 20 years of experience
A trusted partner
Reliable service and customer trust
Technical support
Help with selecting and operating equipment

You might also like

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Back to top