Belimo R2015-1-S1 - 2-way regulating ball valve

Belimo R2015-1-S1 - 2-way regulating ball valve

Belimo
zł272.33
VAT included
zł221.41 tax excluded

Belimo R2015-1-S1 2-way regulating ball valve with a control insert, DN 15, PN 40 and Rp 1/2" female thread. Kvs 1 m³/h, ps 1600 kPa.

Designed for water-side control in ventilation and heating systems. Permitted medium: water or water with up to 50% by volume glycol; medium temperature -10...120°C [14...248°F].

Delivery in approx. 14 days
Share

Belimo R2015-1-S1 – 2-way regulating valve

Valve with a control insert for open and closed water systems and water-side control in ventilation and heating systems. The integrated insert provides an equal-percentage flow characteristic.

Key technical data

  • Design: 2-way; DN 15; PN 40.
  • Connection: Rp 1/2" female thread.
  • Kvs: 1 m³/h; ps 1600 kPa.
  • Medium: water, water with up to 50% by volume glycol.
  • Medium temperature: -10...120°C [14...248°F].
  • Differential pressure: ∆pmax 350 kPa; closing pressure: 1400 kPa. 200 kPa is specified for quiet operation.
  • Flow characteristic: equal-percentage; tightness: bubble-tight, leakage rate A.
  • Body: nickel-plated brass; closing element and stem: stainless steel.

Installation instructions

Permitted installation position: from vertical to horizontal relative to the axis. Installation with the stem pointing downwards is not permitted. Observe the flow direction indicated by the arrow on the body.

At a medium temperature of -10...2°C, stem heating or a valve neck extension is recommended. The permitted medium temperature may be limited depending on the actuator type; restrictions are specified in its product data sheet.

  • Brand
    Belimo
  • Reference
    R2015-1-S1
  • EAN13
    7630498105203

  • Kvs
    1 m³/h
  • Medium
    Water, water with up to 50% vol. glycol.
  • Pattern
    2-way
  • Fluid temperature
    -10...120°C [14...248°F]
  • Fluid temperature, note
    For medium temperatures of -10...2°C, heating the shaft or extending the valve neck is recommended. The permissible medium temperature may be limited depending on the actuator type. Refer to the relevant actuator data sheets for restrictions.
  • Differential pressure
    ∆pmax 350 kPa
  • Closing pressure
    1400 kPa
  • Differential pressure note
    200 kPa for quiet operation
  • Flow characteristic
    Equal-percentage characteristic
  • Permissible leakage
    Bubble-tight, leakage class A
  • Pipe connection
    Internal thread

Techniczna karta katalogowa

Download (1.22MB)

Instrukcja montażu

Download (544.37KB)

Techniczna karta katalogowa – R2..xx-S..

Download (1.2MB)

EU Declaration of Conformity – R20.. / R30.. DN 15...32

Download (130.94KB)

Environmental Declaration – R2..-S..

Download (70.46KB)
In business since 2005
Over 20 years of experience
A trusted partner
Reliable service and customer trust
Technical support
Help with selecting and operating equipment

You might also like

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Back to top