Belimo TRY24 - rotary actuator for ball valves

Belimo TRY24 rotary actuator

TRY24 is a rotary actuator for ball valves. Direct mounting on the valve is secured with one screw; the mounting position relative to the valve can be selected in 90° increments.

Key technical data

• Motor torque: 2 Nm.
• Nominal voltage: AC/DC 24 V; frequency: 50/60 Hz.
• Nominal voltage range: AC 19.2...28.8 V / DC 21.6...28.8 V.
• Control: Open/Close, 3-point.
• Motor running time: 35 s / 90°.
• Power consumption during operation: 0.5 W; sizing power for cable selection: 0.5 VA.
• Power and control connection: 1 m cable, 3x 0.75 mm².
• Manual override and mechanical position indicator.
• Degree of protection IEC/EN: IP40; protection class IEC/EN: III, Safety Extra-Low Voltage (SELV).
• Ambient temperature: -7...50°C.

The device is intended for use in stationary heating, ventilation and air-conditioning installations. With pulsed 3-point control, ensure that the controller stops at the end position.