ProductsPIQCV BELIMO: pressure-independent zone valve
the highest level of room comfort thanks to the optimal amount of water supplied to terminal units, high energy efficiency due to the low pressure differential required during operation, minimal design effort thanks to the ability to select valves quickly and reliably…
ProductsCM..D BELIMO: compact actuators with damper
Residents of flats and apartments are paying increasing attention to stylish interiors. This trend presents a major challenge for architects and installation designers. No one wants installation components to detract from the aesthetics of an interior. That is why installations are often placed in…
ProductsBELIMO SF actuators with spring return
The new SF actuators feature a high torque of 20 Nm, both when moving and holding position. This ensures complete reliability – during both standard operation and activation of the safety function. Two ultrasonically welded covers…
ProductsBELIMO Q: actuators with short running times
New Belimo actuators with short running times open and close air dampers and valves quickly and almost silently, in heating and cooling circuits as well as ventilation and extraction systems. This means fresh air reaches the rooms immediately…
ProductsBELIMO RobustLine: actuators for demanding conditions
In animal husbandry, as well as in buildings with swimming pools, agriculture, food processing and rooftop installations, Belimo RobustLine actuators remain corrosion-resistant and fully sealed, even in the harshest environmental conditions. Terminals made of…
ProductsBELIMO CM: damper actuator for confined spaces
Dimensions L/W/H: 158 mm/56 mm/16 mm (24 mm with position indicator) Running time 90°: programmable up to 35 s Rotation angle adjustable within 0...315° Unlimited rotation angle: adjustable (without stops) Enclosure protection rating: IP54 and IP66 Gear disengagement…
ProductsBELIMO CM: compact actuator design
Due to the close spacing of equipment, direct mounting of actuators on the control elements in air supply and exhaust outlets often causes problems. For this reason, Belimo has developed a completely new type of actuator that sets new standards in every…
EventsBELIMO linear actuators
Belimo linear actuators set new standards: unique in their class, they move control elements by up to 300 mm and, where required, provide positioning accuracy of one millimetre without the linear adapters required by actuators from other manufacturers.…
EventsTraining on BELIMO products
On 16 October 2017, at the invitation of Belimo, we attended a product training session. We learned about new additions to the brand’s range and current solutions in the broad field of industrial automation. Although we are ourselves a manufacturer of equipment for systems…
ProductsQCV BELIMO: compact zone valve
tight shut-off of the control valve, preventing energy losses caused by unwanted circulation in the system, manual setting of the kv coefficient in 2-way control ball valves, automatic adjustment to the set kv value, minimum…
EventsVisualisation of the ELETOR weather station
Today we completed the design work on the mounting and installation system for our own weather station. Work is still ongoing on the electronic components and the interface for the computer and smartphone app. Below, we share a diagram showing the station’s appearance. The example shows installation on…
EventsELETOR weather station
For the past two months, we have been working on our own weather station in our design office. We are currently designing different options for mounting the station on a roof. We are also working on visualising the station’s measurements. The weather station will be powered by a solar panel. Thanks to the WiFi network…
EventsAgro Show 2017 in Bednary
The weekend was full of new inspiration. On Saturday, 23 September, we visited Europe's largest outdoor exhibition of agricultural machinery and equipment in Bednary. We attended the trade fair as observers, mainly looking for marketing inspiration. We got a bit windblown and soaked…
ProductsSC-12 in a server room: using the ELETOR controller
Over the years, the range of applications for our controllers has continued to grow. ELETOR controllers can be found not only in pigsties, but also in poultry houses, barns, greenhouses and mushroom farms. We also create a good climate in porcelain factories and industrial halls. This time…
ProductsSerial production of ventilation controllers ELETOR
A key area of ELETOR's business is the serial production of ventilation controllers. In addition to manufacturing, we also provide technical consultancy and design bespoke electronic solutions for livestock farmers…
ProductsELETOR in the GS1 system
With effect from 24 August 2017, ELETOR was granted the right to use a coding-unit number in the GS1 system. In short, we are setting sail for wider waters, out into the ocean of global trade, and our products will never again get lost in supply chains.
ProductsCapacitive keyboard in ELETOR devices
When designing new products, we give our customers’ suggestions top priority. The electronics market for livestock farmers operates by entirely different rules from, for example, the consumer electronics market. Therefore, devices must be closely tailored to…
ProductsResumption of SC-S and SC-12 shipments at ELETOR
Today we resumed shipping SC-S and SC-12 controllers. Shipments are prepared in order of the orders received. Tomorrow, 15 August, ELETOR will be closed; we will be back at work on 16 August. Thank you for your understanding and patience.
ProductsIoT ELETOR
On Friday morning, we managed to connect to our SC-S controller via WiFi! We’re one step closer to connecting our devices in a network. Our in-house WiFi module is intended to be compatible with all controllers our company has produced to date. This means that even if…
ProductsHigher demand for controllers: ELETOR’s production challenges
This year, we have recorded an almost 100% increase in demand for our controllers from the flagship Speed Control Servomotor series. We are proud and delighted, but it also came as an unexpected surprise. We are doing our best to optimise production and avoid delivery disruptions, but…
ProductsTS5-A: changes to the sensor housing seal
At the request of ELETOR, the manufacturer of housings for our TS5 series sensors produced a batch with a moulded-in gasket. According to the manufacturer's declaration, the housing has an IP67 rating, which according to the standards means complete protection of active or moving internal parts against…