EventsWind speed and direction meters — design presentation
Wind speed and direction meters made from cast aluminium. This material features wind speed and direction meters made from cast aluminium. It presents the subject from the perspective of the device's construction, but does not provide a complete measurement specification. Before…
ProductsElectronics without routine: work and projects at ELETOR
You might think that after producing controllers for more than a decade, we could fall into a routine – but not us. Every day is different from the last, and our customers bring us interesting challenges every day – such as the one in the photo below. Your trust gives us wings…
EventsSummer at ELETOR: production and projects in progress
Summer is in full swing. Some people are on holiday, but not us. Unlike the weather outside, things are really heating up here. Production is running at full speed, and in our design office we are testing more prototypes fresh off the production line. We hope to expand our range with more in-house products later this year…
ProductsELETOR alarm control panel: speaker tests
Yesterday, two speakers for the new series of alarm control panels arrived. They will ultimately work with our devices, but because they are speakers rather than typical alarm sounders, they will need an intermediate device in the form of a sound generator. Thanks to the generator…
EventsNylon connector for joining ropes and cords
What dimensions and fixing method does the project require? Are the material and construction suitable for the conditions at the installation site? What restrictions on use are stated in the component documentation?
ProductsCable pulley on a large angle bracket
What dimensions and mounting method are required for the project? Are the material and construction suitable for the conditions at the installation site? What limitations on use are specified in the component documentation?
EventsExample of mounting a rope pulley on a small bracket
What dimensions and fixing method are required for the project? Are the material and construction suitable for the conditions at the installation site? What usage limitations are specified in the component documentation?
ProductsBackup power supply: opening air inlets and outlets
Backup power supply with automatic and manual opening of air inlets and outlets. Used to ensure the safety of livestock in the event of a power cut or controller failure. If a fault is detected, the device will sound an alarm and open the winches to the set level…
ProductsTS3 probe sensors available again
Today we have replenished our stock of TS3-A-2M temperature sensors. Until now, these sensors were sold as a set with controllers from the Speed Control series. From April 2017, TS3 sensors were replaced by sensors in TS5 housings. Both sensors are…
EventsOEM production: your own brand and working with a manufacturer
OEM production allows you to develop your range under your own brand while working with a device manufacturer. In electronics, putting a logo on the enclosure is just one part of the whole undertaking. Before work begins, the parties should agree on the device’s functions, the scope…
ProductsProfessional assembly has a crucial impact on product quality
The main principle when planning the production of each of our devices was simplicity of design and intuitive operation. That was the case around 12 years ago, when our company was founded. Time, experience and thousands of minutes spent talking to customers and installers have led us to…
ProductsTemperature sensor supplied with the controller: change from 2017
From April 2017, we decided to change the temperature sensor supplied as standard with each of our SC-S and SC-12 controllers. The new sensor is called TS5-A and is already available in our online shop. This decision is in the best interests of our customers.…
ProductsPower supplies for actuators: first batch and inspection
At our workshop, we are completing work on the first batch of 20 pcs. of power supplies for actuators. At every stage of the production process, we do our utmost to ensure that the final product not only meets the expectations of customers and installers, but above all complies with the applicable standards…